Fluid意大利制造MG204XD0PT00000齒輪泵原廠現貨Fluid-o-Tech英文原版資料

數量(個) 價格
99 1260.00元/個
  • 最小起訂： 1個
  • 發貨地址： 福建 廈門市
  • 發布日期：2020-07-27
  • 訪問量：976
咨詢電話：180-2076-5256
打電話時請告知是在機電之家網上看到獲取更多優惠。謝謝！
詳細參數
品牌Fluid-o-Tech型號MG204XD0PT00000
驅動方式氣動泵介質溫度類型深冷泵
材質橡塑最大出口壓力類型中壓泵(4MPa＜Pd＜32MPa)
最大出口壓力數值-額定流量Q-
額定揚程H-葉片式泵葉輪級數單級泵
葉片式泵吸入方式雙吸泵葉片式泵葉輪形式敞開式葉輪
葉片式泵殼體型式節段式葉片式泵泵軸位置立式泵
額定轉速n-軸功率Pa-
泵效率η-容積效率ηv-
汽蝕余量NPSH-允許吸上高度-
吸入口直徑Ds-排出口直徑Dd-
活塞/柱塞行程-往復次數n-
計量精度-最大允許顆粒直徑-
介質粘度ν-介質溫度-
工作溫度-環境溫度-
外形尺寸-顏色金黃色
產地意大利

產品詳情

Fluid意大利制造MG204XD0PT00000齒輪泵原廠現貨Fluid-o-Tech英文原版資料選型指導

Disassembly Instructions Provide a clean surface for work area. Separate the pumphead from the magnet cap. Remove the 3 screws      and disassemble front housing     , driven gear     , central housing      and dowel pins     . If the pump is equipped with by-pass, make sure not to damage the sealing poppet      . Remove the poppet assembly from the adjusting screw (fig. 5), remove the by-pass nut     , the adjusting screw     turning counter-clockwise, the by-pass washer      and the by pass seal      from the cap. Remove the screws      which secure the magnet cup     and the mounting plate      to the rear housing      and disassemble. Remove and discard all the bushings      from the rear housing      and the front housing      with the bushing extractor tool P/N 60211 (fig.1). Remove seal      and flat seals      from the rear housing and from the front housing and discard them. If wear on front housing, rear housing or center housing is excessive, rebuilding the pump my not be advisable.

Re-Assembly Instructions Clean carefully all parts before re-assembling. Any foreign body material clinging to magnet must be removed.

Note Bushings - Bushings on both sides of gears must be recessed 0.5 mm from the face of the rear housing and front housing      (fig. 2) Bushings Installation - Press 6 new bushings      into the rear housing      and front housing      as shown in figure 2 using P/N 60212 installation tool. Once in place, the bushings need to be reamed with P/N 60210 reamer tool (fig. 3). Seals - Apply a thin coat of silicone grease on the central housing      surfaces and place the flat seals      on each side of it insert the driving gear      into the rear housing and then insert the shaft of the driving gear in the driven magnet using the spacer P/N 60213 (fig. 4). Insert 2 dowel pins      in the body. Slip carefully central housing      onto dowel pins against body face, verifying the proper, alignment of the screw holes. Install the driven gear      (The side of gear assembly with longer shaft extension goes into the rear housing). If pump is equipped with by-pass, install the by-pass

seal      , then by-pass nut      and tighten to prevent by-pass seal rotation. Then tap the by-pass seal with the P/N 60214 tool (fig. 6). Disassemble the by-pass nut and install by-pass washer and turn clockwise the adjusting screw      before installing again the by-pass nut tightening. Align the cap bushing holes with gear shafts, and dowel pins      with cap dowel pin holes and assemble. Make sure that the poppet assy goes fully into poppet holes and seat (fig. 5). Install 3 screws      in cap      and tighten alternaby as tight as possible. Turn driven magnet with fingers to check for any binding during the rotation: the magnet should turn freely. Install magnet cup      and mounting plate      with 3 screws      and turn alternaby until tight. Assemble the driving magnet to the motor (see fig. 7) and the pumphead to the motor.

Service Kit - MG Gear Pump Stainless steel pumphead

Service kit contents 2 gears - 1 Teflon “O” ring - 2 Teflon flat seals - 6 bearings

Service kit tools 1 reamer P/N 60210 1 extractor P/N 60211 1 bushing tool P/N 60212 1 spacer P/N 60213 1 tap P/N 60214

SPARES & INSTRUCTIONS – 10/01

Fluid-o-Tech齒輪泵結構特點

（1）結構簡單，價格便宜；

（2）工作要求低，應用廣泛；

（3）端蓋和齒輪的各個齒間槽組成了許多固定的密封工作腔，只能用作定量泵。

齒輪采用國際九十年代先進水平的新技術--雙圓弧正弦曲線齒型圓弧。它與漸開線齒輪相比，最突出的優點是齒輪嚙合過程中齒廓面沒有相對滑動，所以齒面無磨損、運轉平衡、無困液現象，噪聲低、壽命長、效率高。該泵擺脫傳統設計的束縛，使得齒輪泵在設計、生產和使用上進入了一個新的領域。

泵設有差壓式安全閥作為超載保護，安全閥全回流壓力為泵額定排出壓力1.5倍。也可在允許排出壓力范圍內根據實際需要另行調整。但是此安全閥不能作減壓閥長期工作，減壓閥在需要時可另行安裝。

該泵軸端密封設計為兩種形式，一種是機械密封，另一種是填料密封，可根據具體使用情況和用戶要求確定。

齒輪泵泵的分類

就核心組成部件齒輪而言，主要由公法線齒輪泵和圓弧齒輪泵。公法線齒輪泵輸送含雜質的介質比圓弧齒輪泵要耐用，而圓弧齒輪泵結構特殊，輸送干凈的介質，噪音低，壽命長，各有各的優點。

 

MG204XD0PT

MG204XD0TT

MG204XD0GT

MG204XD1PT

MG204XG0PT

MG204XG0TT

MG204XG0GT

MG204XG1PT

MG204SG0PT

MG204SG0TT

MG204SG0GT

MG204SG1PT

MG204SG1TT

MG204SG1GT

MG204YD1PT

MG204YD1TT

MG204YD1GT

MG204YG0PT

MG204YG0TT

MG204YG0GT

MG209XD0PT

MG209XD0PT

MG209XD0TT

MG209XD0GT

MG209XD1PT

MG209XD1TT

MG209XD1GT

MG209XG1PT

MG209XG1TT

MG209XG1GT

MG209XG0PT

MG209XG0TT

MG209XG0GT

MG209SD0PT

MG209SD0TT

MG209SD0GT

MG209SD1PT

MG209SD1TT

MG209SD1GT

MG209SD1PT

MG209SG1PT

MG209SG1TT

MG209SG1GT

MG209SG0PT

MG209SG0TT

MG209SG0GT

MG209YD0PT

MG209YD0TT

MG209YD0GT

MG209YD1PT

MG209YD1TT

MG209YD1GT

MG213XD0PT

MG213XD0GT

MG213XD0TT

MG213XD1PT

MG213XD1TT

MG213XD1GT

MG213XG0PT

MG213XG0GT

MG213XG0TT

MG213XG1PT

MG213XG1TT

MG213XG1GT

MG213SD0PT

MG213SD0TT

MG213SD0GT

MG213SD1PT

MG213SD1TT

MG213SD1GT

MG213SG0PT

MG213SG0TT

MG213SG0GT

MG213SG1PT

MG213SG1TT

MG213SG1GT

MG213YD0PT

MG213YD0TT

MG213YD0GT

MG213YD1PT

MG213YD1TT

MG213YD1GT

MG213YG0PT

MG213YG0TT

MG213YG0GT

MG213YG1PT

MG213YG1TT

MG213YG1GT

MG217XD0PT

MG217XD0TT

MG217XD0GT

MG217XD1PT

MG217XD1TT

MG217XD1GT

MG217XG0PT

MG217XG0TT

MG217XG0GT

MG217SD0PT

MG217SD0TT

MG217SD0GT

MG217SD1PT

MG217SD1TT

MG217SD1GT

MG217SG1PT

MG217SG1TT

MG217SG1GT

MG217YD0PT

MG217YD0TT

MG217YD0GT

MG217YD1PT

MG217YD1TT

MG217YD1GT

MG217YG0PT

MG217YG0GT

MG217YG0TT

MG217YG1PT

MG217YG1TT

MG217YG1GT

 

MS204XD0PT

MS204XD0TT

MS204XD0GT

MS204XD1PT

MS204XG0PT

MS204XG0TT

MS204XG0GT

MS204XG1PT

MS204SG0PT

MS204SG0TT

MS204SG0GT

MS204SG1PT

MS204SG1TT

MS204SG1GT

MS204YD1PT

MS204YD1TT

MS204YD1GT

MS204YG0PT

MS204YG0TT

MS204YG0GT

MS209XD0PT

MS209XD0PT

MS209XD0TT

MS209XD0GT

MS209XD1PT

MS209XD1TT

MS209XD1GT

MS209XG1PT

MS209XG1TT

MS209XG1GT

MS209XG0PT

MS209XG0TT

MS209XG0GT

MS209SD0PT

MS209SD0TT

MS209SD0GT

MS209SD1PT

MS209SD1TT

MS209SD1GT

MS209SD1PT

MS209SG1PT

MS209SG1TT

MS209SG1GT

MS209SG0PT

MS209SG0TT

MS209SG0GT

MS209YD0PT

MS209YD0TT

MS209YD0GT

MS209YD1PT

MS209YD1TT

MS209YD1GT

MS213XD0PT

MS213XD0GT

MS213XD0TT

MS213XD1PT

MS213XD1TT

MS213XD1GT

MS213XG0PT

MS213XG0GT

MS213XG0TT

MS213XG1PT

MS213XG1TT

MS213XG1GT

MS213SD0PT

MS213SD0TT

MS213SD0GT

MS213SD1PT

MS213SD1TT

MS213SD1GT

MS213SG0PT

MS213SG0TT

MS213SG0GT

MS213SG1PT

MS213SG1TT

MS213SG1GT

MS213YD0PT

MS213YD0TT

MS213YD0GT

MS213YD1PT

MS213YD1TT

MS213YD1GT

MS213YG0PT

MS213YG0TT

MS213YG0GT

MS213YG1PT

MS213YG1TT

MS213YG1GT

MS217XD0PT

MS217XD0TT

MS217XD0GT

MS217XD1PT

MS217XD1TT

MS217XD1GT

MS217XG0PT

MS217XG0TT

MS217XG0GT

MS217SD0PT

MS217SD0TT

MS217SD0GT

MS217SD1PT

MS217SD1TT

MS217SD1GT

MS217SG1PT

MS217SG1TT

MS217SG1GT

MS217YD0PT

MS217YD0TT

MS217YD0GT

MS217YD1PT

MS217YD1TT

MS217YD1GT

MS217YG0PT

MS217YG0GT

MS217YG0TT

MS217YG1PT

MS217YG1TT

MS217YG1GT

 

溫馨提示

  • 還沒找到想要的產品嗎？ 立即發布采購信息，讓供應商主動與您聯系！

免責聲明：所展示的信息由會員自行提供，內容的真實性、準確性和合法性由發布會員負責，機電之家網對此不承擔任何責任。機電之家網不涉及用戶間因交易而產生的法律關系及法律糾紛，糾紛由您自行協商解決。
友情提醒：本網站僅作為用戶尋找交易對象，就貨物和服務的交易進行協商，以及獲取各類與貿易相關的服務信息的平臺。為避免產生購買風險，建議您在購買相關產品前務必確認供應商資質及產品質量。過低的價格、夸張的描述、私人銀行賬戶等都有可能是虛假信息，請采購商謹慎對待，謹防欺詐，對于任何付款行為請您慎重抉擇！如您遇到欺詐等不誠信行為，請您立即與機電之家網聯系，如查證屬實，機電之家網會對該企業商鋪?zhàn)鲎N(xiāo)處理，但機電之家網不對您因此造成的損失承擔責任！
您也可以進入“消費者防騙指南”了解投訴及處理流程，我們將竭誠為您服務，感謝您對機電之家網的關注與支持！

您是不是在找